The following cleaning instructions have been compiled for proper hassle-free maintenance.

General cleaning instructions:

For normal everyday cleaning, BayState Bath suggests the use of a mild soap and water with a softwash cloth. Use of scouring pads or abrasive cleansers will dull the surface. Should you wish to use a product not listed below, test on a small area before apply-ing to the acrylic. Always review individual cleansers’ instructions. Always rinse thoroughly after cleaning.

Use only products on this list:

1. Dawn Dish Soap

2. Formula 409

3. Vinegar & Water

4. 1/2 cup of Clorox Bleach per gallon of water

5. Sponge or dish rag

Other products may damage the Acrylic and void your warranty.

Do not use:

Original Clean Shower, Clean Shower for Plastic Showers & Glass, Soft Scrub, Dow disinfect-ant cleaner, Dow Scrubbing Bubbles, Scrub Free, Lysol disinfectant cleaner, acetone, Lestoil, ammonia, fingernail polish remover, aerosol cleaners, or scouring pads.

*Use of these chemicals will cause a dull surface and/or an easily recognizable chemical crack. This will void your product warranty.

There is no need to use abrasive cleaners. Abrasive cleaners dull the gloss over a period of years. In extreme cases where the recommended cleaners do not work, use a Chore Boy or 3M Sponge pad. Make sure you use only the ones recommended for Teflon or non-stick surfaces.

Drain Cleaner:

Caution: liquid drain cleaners are recommended over powders and/or crystal; however, when using liquid drain cleaning agents, bail the standing water out of the bathtub and re-move the drain plug. Use a funnel to prevent spills and apply the chemicals directly down the drain. Always make certain that chemicals do not come in contact with the acrylic sur-face. Use drain cleaners sparingly, so that they do not boil out and attack the acrylic surface.